Program 13 : Abbreviated Dialing
13-01 : Speed Dialing Option Setup
Level:
IN
Description
Use Program 13-01 : Speed Dialing Option Setup to define the Speed Dialing functions.
Input Data
Item
No.
Item Input Data Description Default Related
Program
01 Speed Dialing
Auto Outgoing
Call Mode
0 = Trunk Outgoing
Mode (Use trunk group
assigned in PRG
13-05.)
1 = Intercom Outgoing
Mode (Follow the sys-
tem routing for the
trunk access code en-
tered.)
Set where the Speed Dial bins will
use Trunk Routing (0) or dial the bin
as though it is an Intercom number
(1).
0 13-05
02 Private Speed Di-
al
0 = Do not use
1 = Use
Define use additional 20 Private
speed dial bin beside 1000 Com-
mon speed dial bin or not.
1 13–06
03 Number of Com-
mon Speed Dial-
ing Bins
0 ~ 1000
0 = No Common Speed
Dialing (No System
Speed Dial)
Assign the number of Speed Dial
bins that are used for System Speed
Dials.
900 13-04
04 Trunk Access
Routing (V3.0
Added)
0 = Trunk Group
1 = Trunk Route
0 = PRG13-05 defines a trunk group
in PRG14-05 to select a trunk from.
1 = PRG13-05 refers to a trunk ac-
cess route in PRG14-06.
0
Conditions
None
Feature Cross Reference
• Abbreviated Dialing/Speed Dial
SL1000/SL1100
ISSUE 3.01
2-102 Program 13 : Abbreviated Dialing
Program
13
To Next Page
Loading...
