NEC SL 1000 - Program 12: Night Mode Setup; 12-01: Night Mode Function Setup

Program 12 : Night Mode Setup
12-01 : Night Mode Function Setup
Level:
IN
Description
Use Program 12-01 : Night Mode Function Setup to set up the Night Mode options. Refer to the
following chart for a description of each option, its range and default setting.
Input Data
Item
No.
Item Input Data Description Default Related
Program
01 Manual Night
Mode Switching
0 = Off (Manual Night
Mode changes are not
allowed.)
1 = On (Manual Night
Mode changes are al-
lowed.)
Allow/Prevent a activating Night
Service by dialing a service code.
1 11-10-01
02 Automatic Night
Mode Switching
0 = Off (Automatic
Night Mode disabled)
1 = On (Automatic
Night Mode enabled)
According to a preset schedule, en-
able or disable Automatic Night
Service for the system.
0 12-02
12-03
Even if the operation mode is changed manually, the operation mode changes according to the schedule set
up.
Conditions
None
Feature Cross Reference
• Night Service
SL1000/SL1100 ISSUE 3.01
2-92 Program 12 : Night Mode Setup
Program
12