NEC SL 1000 - DID Trunk Group to Translation Table Assignment

Program 22 : Incoming Call Setup
22-13 : DID Trunk Group to Translation Table Assignment
Level:
IN
Description
Use Program 22-13 : DID Trunk Group to Translation Table Assignment to assign the DID Trunk
Groups to DID Translation Tables. DID trunks should be in their own group. If you have more than one
type of DID trunk, put each type in a separate Trunk Group. For each Trunk Group, you make a
Translation Table entry for each Night Service mode.
Input Data
Trunk Group Number 1 ~ 25
Day/Night Mode 1 ~ 8
Item
No.
Item Input Data Default
01 Conversion Table Area Number 0 ~ 20
(0 = No Setting)
1
Conditions
None
Feature Cross Reference
• Direct Inward Dialing (DID)
ISSUE 3.01 SL1000/SL1100
Programming Manual 2-281
Program
22