Program 45 : Voice Mail Integration
45-01 : Voice Mail Integration Options
Level:
IN
Description
Use Program 45-01 : Voice Mail Integration Options to customize certain voice mail integration
options.
Input Data
Item
No.
Item Input Data Description Default Related
Program
01 Voice Mail De-
partment Group
Number
0 ~ 32
0 = No Voice Mail
Assign which Extension (Depart-
ment) Group number is to be as-
signed as the voice mail group.
0
02 Voice Mail Mas-
ter Name
Up to 12 Characters Enter the Voice Mail Master Name. V.M. (SL1000)
VOICE MAIL
(SL1100)
03 Voice Mail Call
Screening
0 = Off
1 = On
Enable/disable the ability to process
the Call Screening commands (1 +
extension number) sent from the
Voice Mail. You should normally en-
able this option to allow for Voice
Mail Call Screening. Disable this op-
tion if your system has been modi-
fied so that extensions begin with
the digit 1(e.g., 101, 102, etc.). Also
see the “Flexible System Number-
ing” feature.
1 45-01-11
04 Park and Page 0 = Off
1 = On
Enable/disable the system ability to
process the Voice Mail Park and
Page (
) commands. You should
normally enable this option.
1 45-01-12
05 Message Wait 0 = Off
1 = On
Enable/disable the system ability to
process the Voice Mail Message
Wait (#) commands. You should
normally enable this option. If ena-
bled, be sure that the programmed
Message Notification strings don’t
contain the code for trunk access.
1 45-01-13
06 Record Alert
Tone Interval
Time
0 ~ 64800 seconds This time sets the interval between
Voice Mail Conversation Record
alerts.
30
10 New NSL Proto-
col support
0 = Off (Disable)
1 = On (Enable)
0
11 Prefix for Call
Screening
Dial (One digit) 1 45-01-03
12 Prefix for Park
and Page
Dial (One digit)
45-01-04
13 Prefix for Mes-
sage Wait
Dial (One digit) # 45-01-05
SL1000/SL1100 ISSUE 3.01
2-410 Program 45 : Voice Mail Integration
Program
45
To Next Page
Loading...
