Program 15 : Extension, Basic Setup
15-14 : Programmable One-Touch Keys
Level:
SB
(This Program is available for V2.0 or higher) (SL1000)
Description
Use Program 15-14 : Programmable One-Touch Keys to define the One-Touch key data for each
multiline terminal.
For each SL1000/SL1100 Wireless telephone to use the Transfer When Out of Range feature, enter
the destination number (up to 36 digits) and name (up to 12 characters) into One-Touch bin 10. Make
sure to add any required trunk access codes for outside numbers. If this bin information is changed
either through 15-14-01 or through user programming, the destination for the transferred calls is also
changed.
Input Data
Extension Number
Maximum eight digits
Key Number 01 ~ 10
Item
No.
Item Input Data Description Default
01 Dial Data Maximum of 36 digits (0
~ 9,
, #, @, P, R)
@ = Wait for Answer Su-
pervision - ISDN trunks
only
P = Pause - Analog
Trunk Only
R = Hook flash - Analog
Trunk Only
If PRG 15-02-60 is set to a (0) then the
stations personal speed dial entries are
programmed here.
Per key number (1 ~ 10) assign the tele-
phone number that is to be called when
the bin is accessed.
No Setting
02 Name Maximum of 12 charac-
ters
Per key number (1 ~ 10) assign a name to
be used when searching through the direc-
tory.
If a name is not assigned for a speed dial
bin the speed dial entry will not be listed in
the directory.
No Setting
Conditions
None
Feature Cross Reference
None
SL1000/SL1100
ISSUE 3.01
2-160 Program 15 : Extension, Basic Setup
Program
15
To Next Page
Loading...
