Program 10 : System Configuration Setup
10-37 : UPnP Setup
Level:
IN
Description
Use Program 10-37 : UPnP Setup to set the UPnP (Universal Plug and Play) options for SIP trunks.
Input Data
Item
No.
Item Input Data Description Default
01 UPnP Mode 0 = Disable
1 = Enable
Router must support UPnP.
0
02 Retry Time 0, 60 ~ 3600
(1 ~ 59 cannot be input)
Set interval time to re-check the Router for
the WAN IP address.
When this set as 0 it will not retry.
60
Conditions
None
Feature Cross Reference
None
ISSUE 3.01 SL1000/SL1100
Programming Manual 2-41
Program
10
To Next Page
Loading...
