Program 26 : ARS Service & Least Cost
Routing
26-05 : LCR Carrier Table
Level:
IN
Description
Use Program 26-05 : LCR Carrier Table to define the LCR Access Codes and routing options.
These options include Authorization codes and Cost Center
Input Data
Item
No.
Item Input Data Description Default
01 Delete Digits 0 - 16 Enter the quantity of leading digits that
need to be deleted
0
02 Access Code Maximum 16 digits
(0 ~ 9,
, #, P, @)
P = Pause
@ = Change to DTMF or
wait for Connect
Enter the Access Code and Option to
route to the Indirect Carrier
No Setting
03 Authorization Code
Table
0 ~ 10
(0 = No Authorization
code)
Enter the table number that contains the
correct Authorization code.
0
04 Cost Center Code 0 = Not Used
1 = Used
Optionally enter a cost center code. 0
Conditions
The settings must comply with the requirements of the Indirect Carrier. The operation of the @ symbol
within the Access Code depend on the type of trunk. For analog trunk set as Dial Pulse the @ symbol
defines change to DTMF dialing. For ISDN trunks the @ symbol defines that a Connect Message is
received and then DTMF digits are sent in the B-Channel.
Feature Cross Reference
• LCR-Least Cost Routing
ISSUE 3.01
SL1000/SL1100
Programming Manual 2-323
Program
26
To Next Page
Loading...
