NEC SL 1000 - Dial Extension Analyze Table

Program 11 : System Numbering
11-20 : Dial Extension Analyze Table
Level:
IN
Description
Use Program 11-20 : Dial Extension Analyze Table to define the dial type based on three or more
digits. This program is relevant only if digits in 11-01-01 are set to 9 (Dial Extension Analyze).
Input Data
Dial Extension Analyze Table 001 ~ 128
Item
No.
Item Input Data Default Related
Program
01 Dial Extension Analyze Table Dial (Up to four digits : 0, 1 ~ 9, #,
*
, @)
(SL1000)
Dial (Up to eight digits : 0, 1 ~ 9, #,
*
, @)
(SL1100)
No Setting 11-01
02 Dial Extension Analyze Table Type of Dials :
0 = Not used
1 = Service Code
2 = Extension Number
5 = Operator Access
6 = F-Route Access
0 11-01
Conditions
• When the system uses the Dial Extension Analyze Table to determine the dial type, the lower table
has priority. For example, if Table 1 has 211 defined and Table 2 has 2113 defined, Table 1 is used
to determine the dial type.
Feature Cross Reference
None
ISSUE 3.01
SL1000/SL1100
Programming Manual 2-91
Program
11