Program 20 : System Option Setup
20-02 : System Options for Multiline Telephones
Level:
IN
Description
Use Program 20-02 : System Options for Multiline Telephones to set various system options for
multiline telephones.
Input Data
Item
No.
Item Input Data Description Default Related
Program
01 Trunk Loop Key Op-
eration Mode
0 = Keep Lamp
1 = Extinction
0
Mode 0 = Keep Lamp 1 = LED Off
Incoming : 300 IPM Red blink
Talking :
Green Lighting
(on Talking TEL)
LED Off
Holding : 60 IPM Green
blink (on holding
TEL)
LED Off
02 Trunk Group Ac-
cess Key Operating
Mode
0 = Outgoing / Incoming
1 = Outgoing
2 = Incoming
Use this option
to set the oper-
ating mode of
the extension
trunk group
keys. The keys
are for incom-
ing access,
outgoing ac-
cess, or both.
0
03 BLF Control
(SL1100)
0 = Idle / Busy (ON/OFF)
1 = Busy / Idle (ON/OFF)
Set the condi-
tions under
which a Hot-
line, Reverse
Voice Over or
DSS Console
key indicates
that an exten-
sion is busy.
Refer to the
Reverse Voice
Over feature
for more infor-
mation.
1
04 Retrieve the Line Af-
ter Transfer
0 = Not Holding (No Keep)
1 = Holding (Keep)
Enable (1) or
disable (0) an
extension abili-
ty to answer a
call after it has
been transfer-
red, but before
it is answered.
0
SL1000/SL1100 ISSUE 3.01
2-176 Program 20 : System Option Setup
Program
20
To Next Page
Loading...
