NEC SL 1000 - Individual Trunk Group Routing for Extensions

Program 21 : Outgoing Call Setup
21-15 : Individual Trunk Group Routing for Extensions
Level:
IN
Description
Use Program 21-15 : Individual Trunk Group Routing for Extensions to designate the alternate
trunk access route accessed when a user dials the Alternate Trunk Route Access Code. Refer to
Program 11-09 : Trunk Access Code on page 2-69 when setting up alternate trunk codes. Refer to
14-06 : Trunk Group Routing on page 2-119 to set up the trunk routes. When entering data for this
option, enter the route number or 0 to prevent routing.
Input Data
Extension Number Maximum four digits (SL1000)
Maximum eight digits (SL1100)
Day/Night Mode 1 ~ 8
Item
No.
Item Input Data Default
01 Route Table Number 0 ~ 25
0 = No Setting (Calls will not route.)
0
Conditions
None
Feature Cross Reference
• Central Office Calls, Placing
SL1000/SL1100 ISSUE 3.01
2-256 Program 21 : Outgoing Call Setup
Program
21