Program 20 : System Option Setup
20-14 : Class of Service Options for DISA/E&M
Level:
IN
Description
Use Program 20-14 : Class of Service Options for DISA/E&M to enable/disable DISA and tie line
Class of Service options. You assign a DISA Class of Service to DISA users in Program 25-09. Assign
tie line Classes of Service in 34-02. Up to 15 DISA/E&M Classes of Service can be defined.
Analog trunk-to-analog trunk and ISDN trunk-to-ISDN trunk calls are supported by this program.
However, analog trunk-to-ISDN trunk and ISDN trunk-to-analog trunk calls are NOT supported by this
program.
Input Data
Class of Service Number 01 ~ 15
Item
No.
Item Input Data Description Default
01 First Digit Absorption
(Delete First Digit Di-
aled)
0 = Off
1 = On
For tie lines, enable or disable the ability to
absorb (ignore) the first incoming digit.
Use this to make the tie trunk compatible
with 3- and 4-digit tie line service. This op-
tion does not apply to DISA.
COS 01 ~ 15 = 0
02 Trunk Group
Routing/ARS Access
0 = Off
1 = On
This option enables or disables a DISA or
tie trunk caller ability to dial 9 for Trunk
Group Routing or Automatic Route Selec-
tion (ARS/F-Route).
COS 01 ~ 15 = 0
03 Trunk Group Access 0 = Off
1 = On
This option enables or disables a DISA or
tie trunk caller ability to access trunk
groups for outside calls (Service Code
804).
COS 01 ~ 15 = 0
04 Outgoing System
Speed Dial
0 = Off
1 = On
This option enables or disables DISA or tie
trunk caller ability to use the System
Speed Dialing.
COS 01 ~ 15 = 0
05 Operator Calling 0 = Off
1 = On
This option enables or disables a DISA or
tie trunk caller ability to dial 0 for the tele-
phone system operator.
COS 01 ~ 15 = 0
06 Internal Paging 0 = Off
1 = On
This option enables or disables a DISA or
tie trunk caller ability to use the telephone
system Internal Paging.
COS 01 ~ 15 = 0
07 External Paging 0 = Off
1 = On
This option enables or disables a DISA or
tie trunk caller ability to use the telephone
system External Paging.
COS 01 ~ 15 = 0
08 Direct Trunk Access 0 = Off
1 = On
This option enables or disables a DISA or
tie trunk caller ability to use Direct Trunk
Access (Service Code #0).
COS 01 ~ 15 = 0
09 Forced Trunk Discon-
nect <Not for ISDN T-
point>
0 = Off
1 = On
This option enables or disables a tie trunk
caller ability to use Forced Trunk Discon-
nect (Service Code 724). This option is not
available to DISA callers.
COS 01 ~ 15 = 0
ISSUE 3.01 SL1000/SL1100
Programming Manual 2-199
Program
20
To Next Page
Loading...
