Program 31 : Paging Setup
31-06 : External Speaker Control
Level:
IN
Description
Use Program 31-06 : External Speaker Control to define the settings for the external speaker using
an amplifier.
Input Data
External Speaker Number 1 ~ 3
Item
No.
Item Input Data Description Default
01 Broadcast Splash
Tone Before Paging
(Paging Start Tone)
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
Use this option to enable or disable splash
tone before Paging over an external zone.
If enabled, the system broadcasts a splash
tone before the External Paging an-
nouncement.
2
02 Broadcast Splash
Tone After Paging
(Paging End Time)
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
Use this option to enable or disable splash
tone after Paging over an external zone. If
enabled, the system broadcasts a splash
tone at the end of an External Paging an-
nouncement.
2
03 Speech Path 0 = Both Way (Duplex)
1 = One Way (Simplex)
Determine if the external speaker will be
used for talkback (As this option is not
available with the CPU external page
zone, speaker 9 should be left at 1).
1
04 CODEC Transmit
Gain Setup
1 ~ 63 (- 15.5 ~ + 15.5
dB)
32
05 CODEC Receive Gain
Setup
1 ~ 63 (- 15.5 ~ + 15.5
dB)
32
Conditions
None
Feature Cross Reference
• Paging, External
ISSUE 3.01
SL1000/SL1100
Programming Manual 2-349
Program
31
To Next Page
Loading...
