Program 20 : System Option Setup
20-36 : Trunk's Operator Setting
Level:
IN
Description
Use Program 20-36 : Trunk’s Operator Setting to assign a trunk to an operator group.
Input Data
Trunk Port Number 001 ~ 126 (SL1000)
001 ~ 096 (SL1100)
Item
No.
Item Input Data Description Default
01 Trunk’s Operator Set-
ting
0 ~ 15
(0 = No Setting)
Allows the user to select Operator Group
per trunk when DISA is being used. After
the user enters the 6 digit DISA password
if the user dials 0 this command will decide
which operator to route the call to.
0
Conditions
None
Feature Cross Reference
None
SL1000/SL1100 ISSUE 3.01
2-222 Program 20 : System Option Setup
Program
20
To Next Page
Loading...
