NEC SL 1000 - Alternate Trunk Group Routing for DISA

Program 25 : VRS/DISA Setup
25-12 : Alternate Trunk Group Routing for DISA
Level:
IN
Description
Use Program 25-12 : Alternate Trunk Group Routing for DISA to define the trunk route selected
when a DISA caller dials the Alternate Trunk Access Code. The route selected is based on the DISA
caller Class of Service, which in turn is determined by the password the caller dials. When
programming, make a separate entry for each Night Service Mode.
Use Program 11-09-02 to set the Alternate Trunk Access Code. Use Program 14-06 to set trunk routes.
Input Data
DISA User Number 1 ~ 15
Day/Night Mode 1 ~ 8
Item
No.
Item Input Data Default
01 Route Table Number 0 ~ 25
(0 = No Setting)
0
Conditions
• You cannot use Program 21-15 to assign alternate trunk routing to DISA trunks.
Feature Cross Reference
• Direct Inward System Access (DISA)
• Trunk Group Routing
SL1000/SL1100 ISSUE 3.01
2-314 Program 25 : VRS/DISA Setup
Program
25