Program 10 : System Configuration Setup
10-09 : DTMF and Dial Tone Circuit Setup
Level:
IN
Description
Use Program 10-09 : DTMF and Dial Tone Circuit Setup to allocate the circuits on the CPU for
either DTMF receiving or dial tone detection. The CPU has 20 (SL1000) 16 (SL1100) circuits initially,
and an additional 16 circuits are added when a VMDB is installed. By Adding EXIFE system can have
up to 132 (SL1000) 96 (SL1100). These are used as follows:
• Extension: DTMF receiver for single line telephone
• Trunk: DTMF receiver for analog trunks, dial tone & busy tone detection for analog trunks
Input Data
Circuit/Resource Number 01 ~ 132 (SL1000)
01 ~ 96 (SL1100)
ISSUE 3.01 SL1000/SL1100
Programming Manual 2-15
Program
10
To Next Page
Loading...
