NEC SL 1000 - System Options for Virtual Extensions

Program 20 : System Option Setup
20-04 : System Options for Virtual Extensions
Level:
IN
Description
Use Program 20-04 : System Options for Virtual Extensions to set up various system options for
Virtual Extensions. There are 50 available Virtual Extension ports.
Input Data
Item
No.
Item Input Data Description Default Related
Program
01 Virtual Extension
Key Operation
Mode
0 = Release Virtual Ex-
tension Key
1 = Hold Virtual Exten-
sion Key
With an entry of “0”, after answering
a call on a virtual extension key,
once the call is picked up, the call
comes off the virtual extension key
and appears on the line or loop key.
With an entry of “1”, after answering
a call on a virtual extension key,
once the call is picked up, the call
will remain on the virtual extension
key.
0 15-18-01
03 Virtual Extension
Delay Interval
0 ~ 64800 seconds Virtual Extensions set for Delayed
Ringing (see Program 15-11) ring
the extension after this time.
10
04 Virtual Extension
Key Seize Mode
0 = Normal
1 = Enhanced Option
When set to Enhanced, the BLF will
not show as being busy when the
station is on a trunk call.
When set to Normal, the BLF will
show as being busy when on a trunk
call.
1
05 Ringtone mode
for incoming to
VE (V2.0 Added)
0 = Off
1 = On
Enable the distinctive ring tone
when incoming ring.
0 22-03-01
15-08-01
Conditions
None
Feature Cross Reference
• Virtual Extensions
ISSUE 3.01
SL1000/SL1100
Programming Manual 2-181
Program
20