NEC SL 1000 - Service Code Setup (for Service Access)

Program 11 : System Numbering
11-12 : Service Code Setup (for Service Access)
Level:
IN
Description
Use Program 11-12 : Service Code Setup (for Service Access) to customize the Service Codes
which are used for service access. You can customize additional Service Codes in Programs 11-10,
11-11, and 11-14 through 11-16.
The following chart shows:
• The number of each code (01 ~ 64).
• The function of the Service Code.
• The type of telephones that can use the Service Code.
• The default entry. For example, dialing (Item 05) cancels a previously set Camp- On.
• Programs that may be affected with the changing the code.
Input Data
Item
No.
Item Input Data Description Default Related
Program
01 Bypass Call 0~9,
*
, # Maximum of
4 digit (SL1000)
0~9,
*
, # Maximum of
8 digit (SL1100)
Terminal: MLT, SLT
Activating Call Forwarding/Do Not
Disturb Override. This code is avail-
able only if you disable the voice
mail Single Digit dialing code in Pro-
gram 11-16-09.
807
02 Conference 0~9,
*
, # Maximum of
4 digit (SL1000)
0~9,
*
, # Maximum of
8 digit (SL1100)
Terminal: MLT, SLT 826
03 Override (Off-
Hook Signaling)
0~9,
*
, # Maximum of
4 digit (SL1000)
0~9,
*
, # Maximum of
8 digit (SL1100)
Terminal: MLT, SLT 809
04 Set Camp-On 0~9,
*
, # Maximum of
4 digit (SL1000)
0~9,
*
, # Maximum of
8 digit (SL1100)
Terminal: MLT, SLT 850
05 Cancel Camp-On 0~9,
*
, # Maximum of
4 digit (SL1000)
0~9,
*
, # Maximum of
8 digit (SL1100)
Terminal: MLT, SLT 870
06 Switching of
Voice Call and
Signal Call
0~9,
*
, # Maximum of
4 digit (SL1000)
0~9,
*
, # Maximum of
8 digit (SL1100)
Terminal: MLT, SLT 812
07 Step Call 0~9,
*
, # Maximum of
4 digit (SL1000)
0~9,
*
, # Maximum of
8 digit (SL1100)
Terminal: MLT, SLT 808
SL1000/SL1100 ISSUE 3.01
2-80 Program 11 : System Numbering
Program
11