NEC SL 1000 - SIP Trunk Basic Information Setup

Program 84 : Hardware Setup for VoIPDB
84-14 : SIP Trunk Basic Information Setup
Level:
IN
Description
Use Program 84-14 : SIP Trunk Basic Information Setup to define the basic setup for SIP trunks.
Input Data
Item
No.
Item Input Data Description Default
01 INVITE ReTx Count 0 ~ 255 Specifies the number of times the INVITE
message is sent.
7
02 Request ReTx Count 0 ~ 255 Specifies the number of times Request
message except INVITE are sent.
11
03 Response ReTx
Count
0 ~ 255 Specifies the number of times the Re-
sponse message is sent.
7
04 Request ReTx Start
Time
0 ~ 65535
(0 ms ~ 6553.5 seconds)
5 (500 ms)
05 Request Maximum
ReTx Interval
0 ~ 65535
(0 ms ~ 6553.5 seconds)
40 (4000 ms)
06 SIP Trunk Port Num-
ber
1 ~ 65535 5060
07 Session Timer Value 0 ~ 65535 0
08 Minimum Session
Timer Value
0 ~ 65535 1800
09 Called Party Informa-
tion
0 = Request URI
1 = To Header
0
10 URL Type 0 = SIP-URL
1 = TEL-URL
0
11 URL/To HeaderSet-
ting Information (V3.0
Added)
0 = Proxy Server Do-
main
1 = SIP UA Domain
0
13 SIP Trunk Incoming/
Outgoing via
E164SIP_URI (V1.5
Added)
0 = Off
1 = Mode 1 (V3.0
Changed)
2 = Mode 2 (V3.0
Changed)
3 = Mode 3 (V3.0 Add-
ed)
0
15 100rel Settings (V1.5
Added)
0 = Use default Settings
1 = Use opposite Default
Setting
0
16 SIP Trunk SIP-URI E.
164 Incoming Mode
(V2.0 Added)
0 = OFF
1 = Mode 1
2 = Mode 2
0
17 Call Forward Moved
Temporarily Support
(V3.0 Added)
0 = Disabled
1 = 302 Return
When enabled a 302 Moved temporarily
response is sent for external call forward
destinations.
0
ISSUE 3.01 SL1000/SL1100
Programming Manual 2-523
Program
84