Program 15 : Extension, Basic Setup
15-22 : Mobile Extension Setup
Level:
IN
Description
Use Program 15-22 : Mobile Extension Setup to set the system information for the Mobile Extension
feature.
Input Data
Extension Number Up to four digits (SL1000)
Up to eight digits (SL1100)
Item
No.
Item Input Data Description Default
01 Mobile Extension Tar-
get Setup
0 = No Setting
1 ~ 999 = Speed Dial
Bin 1 ~ 999 (PRG 13-04)
Set which Speed Dial bin is used to call
when the Mobile extension is called.
0
02 Connect Confirmation 0 = Always (User must
dial
when answered
for the call to cut through
on ALL line types.)
1 = On Analog Line
(User must dial
when
answered for the call to
cut through on Analog
lines only.)
2 = Never (When the call
is answered the call is
immediately cuts
through.)
Per Mobile Extension, assigned in PRG
11-02, select whether a confirmation is re-
quired (user dials*) to allow the call to cut
through when answered.
0
03 Trunk Access Code 0 = Normal Trunk Ac-
cess (PRG 11-09-01)
1 = Individual Trunk Ac-
cess (PRG 11-09-02)
Select if the Normal (0) or Individual (1)
Trunk access is used when making the call
to the mobile number.
0
04 Call Back 0 = Disable
1 = Enable
0
Conditions
None
Feature Cross Reference
None
ISSUE 3.01
SL1000/SL1100
Programming Manual 2-165
Program
15
To Next Page
Loading...
