NEC SL 1000 - 15-07: Programmable Function Keys

Program 15 : Extension, Basic Setup
15-07 : Programmable Function Keys
Level:
SA
Description
Use Program 15-07 : Programmable Function Keys to assign functions to a multiline terminal line
keys.
For certain functions, you can append data to the key basic function. For example, the function 26
appended by data 1 makes a Group Call Pickup key for Pickup Group 1. You can also program
Function Keys using Service Codes.
To clear any previously programmed key, press 000 to erase any displayed code.
Input Data
Extension Number
Maximum four digits (SL1000)
Maximum eight digits (SL1100)
Default Settings
Line Key Function Number Additional Data
LK01
*
01 (Trunk Line Key) 1
: : :
LK12
*
01 (Trunk Line Key) 12
LK13 0 (No setting) 0
: : :
LK24 0 (No setting) 0
Item No. Item Input Data Additional Data
01 Line Key Number 1 ~ 24 Refer to Table 2-2 Function Number
List on page 2-145.
Function Number 0 ~ 99, #0 ~ #99
(Normal Function Code) (Service Code
851 by default)
*
00 ~
*
99
(Appearance Function Code) (Service
Code 852 by default)
Refer to Table 2-2 Function Number
List on page 2-145.
Default
Programmable keys 1 ~ 8 are Trunk Line keys (key 1 = Trunk Line 1, key 2 = Trunk Line 2, etc.). All
other programmable keys are undefined.
Function Number List
SL1000/SL1100
ISSUE 3.01
2-144 Program 15 : Extension, Basic Setup
Program
15