NEC SL 1000 - Virtual Loop Back Port Setting

Program 10 : System Configuration Setup
10-42 : Virtual Loop Back Port Setting
Level:
IN
Description
Use Program 10-42 : Virtual Loop Back Port Setting to set the data for the Virtual Loop Back Port.
Input Data
Item
No.
Item Input Data Default
01 Number of Loop Back Ports 0 ~ 30 (0 = No Setting) 0
02 Logical Trunk Port Number Read Only:
1 ~ 126 (SL1000)
1 ~ 96 (SL1100)
0
03 Logical Station Port Number Read Only:
1 ~ 128 (SL1000)
1 ~ 120 (SL1100)
0
04 Layer 3 Timer Type 1 ~ 5 1
05 Calling Party Number 0 = No
1 = Yes
1
06 S-point DDI digits 0 ~ 4 0
07 Call Busy Mode for S-point 0 = Alerting Message
1 = Disconnect Message
0
Conditions
None
Feature Cross Reference
None
SL1000/SL1100 ISSUE 3.01
2-44 Program 10 : System Configuration Setup
Program
10