Program 20 : System Option Setup
20-34 : Remote Conference Group Setup
Level:
SA
Description
Use Program 20-34 : Remote Conference Group Setup to define the Remote Conference options.
Input Data
Remote Conference Group Number 1 ~ 4
Item
No.
Item Input Data Description Default
01 Conference Name Up to 12 characters Enter the name displayed at the time of a
Remote Conference. This entry will display
on the keyset LCD.
Group1 = Conf1
Group2 = Conf2
Group3 = Conf3
Group4 = Conf4
02 Password 4 digits Fixed
(0 ~ 9, @ = wild charac-
ter)
Define the password of a Remote Confer-
ence.
Group1 = 1111
Group2 = 2222
Group3 = 3333
Group4 = 4444
03 Max participants 0 ~ 32 Define the maximum number of partici-
pants of a Remote Conference.
8
04 Max Conference Du-
ration
0 ~ 64800 seconds Define the maximum duration of a Remote
Conference.
When this time passes, the conference is
disconnected by the SL1000/SL1100.
7200
05 End Tone Alert Time 0 ~ 64800 seconds Determine how long prior disconnecting a
Remote Conference call (based on the
maximum conference duration above) the
SL1000/SL1100 should send out a beep.
This is used to warn the conference partic-
ipants of the pending disconnect.
300
Conditions
None
Feature Cross Reference
• Conference, Remote
SL1000/SL1100
ISSUE 3.01
2-220 Program 20 : System Option Setup
Program
20
To Next Page
Loading...
