Program 44 : ARS/F-Route Setup
44-01 : System Options for ARS/F-Route
Level:
IN
Description
Use Program 44-01 : System Options for ARS/F-Route to define the system options for the ARS/F-
Route feature.
Input Data
Item
No.
Item Input Data Description Default
01 ARS/F-Route Time
Schedule
0 = Not Used
1 = Used
If this option is set to 0, the F-Route table
selected is determined only by the digits
dialed without any relation to the day or
time of the call.
If this option is set to 1, the system first re-
fers to PRG 44-10. If there is a match, the
pattern defined in that program is used. If
not, the F-Route pattern in PRG 44-09 and
time setting in 44-08 are used.
0
02 Dial Tone Simulation
(V2.0 Added)
1 digit (0 ~ 9)
, # cant be used
When first dialed digit matches with the
data set in this Program, system send si-
mulated DT to calling party after receiving
first digit. Numbering plan for the dial
needs to configure as F-Route at PRG
11-01.
None
03 Tone Kind (V2.0 Add-
ed)
0 = Internal DT
1 = External DT
Set simulated DT kind which can change
the tone used at PRG 44-01-02 and PRG
44-02-04.
0
Conditions
None
Feature Cross Reference
• Automatic Route Selection (ARS/F-Route)
SL1000/SL1100
ISSUE 3.01
2-396 Program 44 : ARS/F-Route Setup
Program
44
To Next Page
Loading...
