NEC SL 1000 - Account Code Setup

Program 35 : SMDR Account Code Setup
35-05 : Account Code Setup
Level:
IN
Description
Use Program 35-05 : Account Code Setup to set various Account Code options for an extension
Class of Service. Assign a Class of Service to extensions in Program 20-06.
Input Data
Class of Service Number 01 ~ 15
Item
No.
Item Input Data Description Default
01 Account Code Mode 0 = Account Codes Disa-
bled
1 = Account Codes Op-
tional (This is for the ac-
count code entry fea-
ture.)
2 = Account Code Re-
quired Not Verified
(Forced Account Codes
enabled, no verification
with the system re-
quired)
3 = Account Code Re-
quired and Verified
(Forced Account Codes
enabled, verification with
PRG 35-06-01 required)
Use this option to select the Account Code
Mode (0 ~ 3).
0
02 Forced Account Code
Toll Call Setup
0 = Account Codes for
ALL calls
1 = Account Codes for
TOLL calls
Use this option enable Account Codes for
all calls or just toll calls (for mode 2 or 3 in
Item 01 above).
0
03 Account Codes for In-
coming Calls
0 = Disabled (User can-
not enter an account
code.)
1 = Enabled (User can
enter an account code
while on an incoming
call.)
Use this option to allow users to enter Ac-
count Codes for incoming calls. If disabled,
any codes entered dial out on the connec-
ted trunk.
0
04 Hiding Account Co-
des
0 = Account Codes dis-
played
1 = Account Codes not
displayed
Use this option to either hide or show the
Account codes on a telephone display.
0
Conditions
None
SL1000/SL1100
ISSUE 3.01
2-376 Program 35 : SMDR Account Code Setup
Program
35