TERMINAL SETUP
20
FOR CALL INDICATOR LAMP
Following explains how to set the illumination
pattern (color of Call Indicator Lamp).
1.
Display the Menu screen, and select “Settings”
2.
Select “
1
User Settings”.
3.
Select “
1
Incoming Call”
4.
Select “ 4
Illumination”.
5.
Select “ 1
External Call” or “ 2
Internal Call”.
6.
Select a desired illumination pattern.
TO ENABLE/DISABLE RTP
ALARM
Following explains how to enable/disable RTP
Alarm. The RTP Alarm tone allows the terminal user
to be notified that the voice packet is not received in
a certain period of time because of the network
delay etc.
1.
Display the Menu screen, and select “Settings”
2.
Select “
1
User Settings”.
3.
Select “
2
Talk”
4.
Select “ 1
RTP Alarm”.
5.
Select whether to ring the RTP Alarm.
If the “ 0 Automatic” is selected, this
feature is activated in accordance with
the system data setting. If it is not
specified by the system data this
feature is in effect (RTP Alarm =
‘ON’). For details, please contact the
system administrator.
TO ENABLE/DISABLE DTMF
TONE
Following explains how to set whether DTMF tone
is played when the other party telephone pressed a
button during a call,
1.
Display the Menu screen, and select “Settings”
2.
Select “
1
User Settings”.
3.
Select “
2
Talk”
4.
Select “ 2
DTMF Tone”.
5.
Select whether DTMF tone is played.
To Next Page
Loading...
