NEC UNIVERGE DT930 - How to Use System Soft Keys

OPERATION
46
HOW TO USE SYSTEM SOFT KEYS
This section provides some sample operations of
features using system soft keys.
SETTING DO NOT DISTURB
1. Press Speaker key, press Soft key (>>>>) and
press Soft key (DND).
“SET” is displayed.
CANCELLING DO NOT DISTURB
1. Press Soft key (DND).
“CANCEL” is displayed.
SETTING CALL FORWARDING –
BUSY LINE
1. Press the Soft key (>>>>) repeatedly until display
shows “FDN”.
2. Press Soft key (FDN).
Speaker key lamp light red.
3. Dial the station number to be transferred.
4. After 4 seconds, return back to the idle screen
automatically. (or Press Speaker Key)
Speaker key lamp goes off.
CANCELING CALL FORWARDING –
BUSY LINE
1. While setting Call Forwarding - Busy Line.
2. Press the Soft key (>>>>) repeatedly until display
shows “FDN”.
3. Press Soft key (FDN).
Speaker key lamp lights red.
4. Press “ * “.
5. After 4 seconds, return back to the idle screen
automatically. (or Press Speaker Key)
Speaker key lamp goes off.