Chapter 9 Descriptions
UNIVERGE NEAX 2000 IPS
Request for Proposal (RFP) Reference Guide Page 9- 37
Issue 6
Centralized E911 – CCIS
This feature allows the system to transmit a
calling party number to the 911 Emergency
system over CCIS tandem connection.
Consultation Hold - All Calls - CCIS
This feature permits a station user, within the
CCIS network, to hold any incoming or
outgoing public network or Tie Line call while
originating a call to another station within the
CCIS network.
Date Line Security- CCIS
This service feature allows the lines, which
are used for data transmission through CCIS
to be, protected from interruptions such as
Attendant Camp - On, Busy Verification -
CCIS, Executive Right of Way, and Attendant
Override.
Deluxe Traveling Class Mark - CCIS
This feature provides outgoing call restrictions
within the CCIS network. The following three
types of restrictions are allowed:
• Deluxe Traveling Class Mark Restriction
• Route Restriction
• Numbering Restriction
Dial Access to Attendant – CCIS
This feature allows a station user to call an
Attendant Console by dialing an operator call
code through the CCIS network.
Digital Display - Station - CCIS
This service feature provides a display of the
station number on the Attendant Console,
during an Attendant-to-station connection,
within the CCIS network.
Digital Display - Trunk - CCIS
This service feature provides the Attendant
with a visual indication of incoming and
outgoing trunk calls during an attendant-to-
trunk connection within the CCIS network.
Trunk Group number and trunk identification
code are displayed.
Direct-In Termination - CCIS
This feature automatically routes incoming
exchange calls through CCIS to a pre-
assigned station in the network, without
Attendant assistance.
Distinctive Ringing – CCIS
This feature provides distinctive station ringing
patterns for terminated calls, through the
CCIS network, so that a station user can
distinguish between incoming internal and
external calls.
Do Not Disturb - CCIS
This feature allows a station user to establish
Do Not Disturb (DND) status on a temporary
basis, during which time access to the station
from CCIS calls will be denied.
Dual Hold – CCIS
This feature allows two connected Multiline
Terminals to be placed on hold
simultaneously over the CCIS link. This
enables the held parties to answer or originate
a call from a secondary extension or the idle
primary extension.
Elapsed Time Display – CCIS
This feature provides an LCD, which shows
the duration of time that a Multiline Terminal is
connected to any trunk through the CCIS
network.
To Next Page
Loading...
