NEC UNIVERGE NEAX 2000 IPS - Page 276

Chapter 13 Voice Over IP (VoIP)
Page 13- 34 UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
Issue 6
TCP/UDP/RTP PORT NUMBER CONDITIONS
Tables below show the default TCP/UDP/RTP port number and range of the available TCP/UDP/RTP
port numbers used in 2000 IPS
For Dterm IP
Port Type Destination Default Port No. Remarks
2000 IPS
(MP Built-in DRS of
Main Site)
3456
1024-65535
Assign by CM0B Y=10>60
2000 IPS
(MP Built-in DRS of
Remote Site)
3456 Fixed
Port of Login to
DRS (UDP)
Dterm IP 3455
1024-65535
Assign by Dterm IP set up
(User Menu)
2000 IPS
50000 + 64 x Virtual
FP No. + Dterm IP
Port No.
Base Port: 1024-65534
Assign by CM0B Y=10>00-59
(Virtual FP No.)
(Default: 50000 + 64 x Virtual FP No.)
Port for
PROTIMS
(UDP)
Dterm IP 3458
1024-65534
Assign by Dterm IP set up
(User Menu)
For Voice Control/Voice Packet
Port Type Destination Default Port No. Remarks
Dterm IP 4000
1024-65535
Assign by Dterm IP set up
(User Menu)
Port for Voice
Control (UDP)
IP PAD 50000
1024-65534
Assign by CM0A Y=10-17/
30-37/100-115>90
Dterm IP 0
1024-65534
Assign by Round Robin method
(Use From the lowest in blank port)
Port for H.245
Voice Control
(TCP)
IP PAD 6000-7024
Base Port: 1024-65534
Assign by CM0A Y=10-17/
30-37/100-115>92
(Set every 1025 port)