Chapter 1 Introduction
Page 1-24 UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
Issue 6
IPS DMR Capacity
Capacity Per MC
Number of PHYSICAL MODULAR CHASSIS
1 2
No. of ports 56 112
LT card Note 1
No. of cards 7 14
No. of ports Max. 256 ports per network
AP card
No. of cards 7 14
IP-PAD No. of channel 32 64
Single Line Telephone (Lines) 8LC 56 112
Standard 56 112
Dterm(Lines)
Long Line 8 16
DtermIP/DtermIP/INASET(Peer to Peer Connection) Note 2 128
Loop Start 56 112
DID w/4DID 28 56
Central Office Trunk (Lines)
2W/4W E&M 14 28
DTI 1.5M 7 10
1.5M(PRT) 7 8
ISDN
4BRT (card) 5 10
PFT Connections 4 8
IPS PIMMJ (As Remote PIM) Capacity
Capacity Per PIM
Number of PHYSICAL PIMS
1 2
No. of ports 64 128
LT card
No. of cards 8 16
No. of ports Max. 256 ports per network
AP card
No. of cards 12 24
IP-PAD No. of channel 32 64
Single Line Telephone (Lines) 8LC 64 128
Standard 64 128
Dterm(Lines)
Long Line 24 48
DtermIP/DtermIP/INASET(Peer to Peer Connection) Note 2 128
Loop Start 64 128
DID w/4DID 48 96
Central Office Trunk (Lines)
2W/4W E&M 24 48
DTI 1.5M 10
1.5M(PRT) 8
ISDN
4BRT (card) 6 12
PFT Connections 8 16
Note 1: Each Modular Chassis has 24 Virtual LT Ports that can only be used to expand the PAD
channels from 8 to 32 using the 8IPLA w/24IPLA.
Note 2:
Remote PIM’s Support up to 2 Virtual PIM’s for assignment of DtermIP/DtermIP/INASET only.