NEC UNIVERGE SV7000 - Page 133

128
STEP 17:The display goes back to the Edit screen. Se-
lect Illumination.
Select an item by one of the following operations.
• Touch panel operation
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 18:Select a desired color of the Call Indication
lamp.
Select an item by one of the following operations.
• Touch panel operation
• Highlight an item by using , and then press
or OK soft key.
• Press - key, and then press or OK soft
key.
TIP
For details on each ringer tone type, see TO SET
RINGER TONE.
TIP
The user can set ringer tone for calls routed from the
specific name (calling party) here. Ringer Tone type can
be set for “Name”, “Group” and “Telephone set”. The
ringer Tone type set for “Name” has higher priority than
the types set for “Group” and “Terminal set”.
TIP
If the Ring Tone setting is not performed, “1 Automatic”
is applied.
TIP
When 1 Automatic or 2 Default is selected, the
setting for “Group” or “Telephone Set” is applied.
1
2
3
4
OK
Back
↓
5
6
7
8
1/3
[Ring Tone]
Automatic
Default
Tone Type 1
Tone Type 3
Tone Type 2
Tone Type 4
Tone Type 5
Tone Type 6
9
9
9
0
0
Q
OK
Back
2/2
[Edit]
Save
0
Illumination
0
9
1
2
3
4
OK
Back
↓
5
6
7
8
1/2
Automatic
Default
[Illumination]
Disable
Yellow
Red
Green
Blue
Light Blue