NEC UNIVERGE SV7000 - Page 51

46
• TO CHANGE PASSWORD
To change an existing password, follow the procedure
below. This password is used for the following
occasions.
• To lock/unlock the telephone.
• To delete the directory data.
• To reset the telephone settings.
STEP 1: While indicating the current time on LCD,
press key to open the Menu screen.
STEP 2: Select Setting.
Select an item by one of the following operations.
• Touch panel operation
• Highlight an item by using , and then press
or OK soft key.
• Press key.
STEP 3: Select User Setting.
Select an item by one of the following operations.
• Touch panel operation
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 4: Select Change.
Select an item by one of the following operations.
• Touch panel operation
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 5: Enter the old password.
After entering the old password, press or Set
Menu
5
↓
↓
Back
OK
Tool
Directory
History
Setting
Presence
Favorite
Config
Call Func.
[Menu]
1
1
↓
Back
OK
1
2
Data Backup/Restore
[Setting]
3
Download
User Setting
1/1
4
4
OK
Back
1/1
[User Setting]
1
2
3
4
5
6
0
↓
Peripherals
Setting Reset
Security
Incoming Call
Talk
↓
Display
Change Password