NEC UNIVERGE SV7000 - Page 64

59
STEP 6: Select a protocol used by the destination
server.
Select an item by one of the following operations.
• Touch panel operation
• Highlight an item by using , and then press
or OK soft key.
• Press or key, and then press or OK soft
key.
STEP 7: The display goes back to the Backup/Re-
store screen.
When FTP is selected here, go to the
next Step (STEP 7).
When TFTP is selected here, go to the
next STEP 15.
STEP 8: Select FTP Settings.
Select an item by one of the following operations.
• Touch panel operation
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 9: Select User ID.
Select an item by one of the following operations.
• Touch panel operation
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
↓
Back
OK
1
2
3
1/1
↓
4
Data Backup
Data Restore
Server Address
FTP Settings
Protocol
5
[Backup/Restore]
1
2
1
2
OK
Back
↓
1/1
FTP
TFTP
[Protocol]
1
2
5
5
OK
Back
1/1
1
2
3
4
Server Address
Protocol
↓
[Backup/Restore]
5
FTP Settings
Data Backup
Data Restore
1
1