Copyright 2008 NEC Philips Unified Solutions B.V. Exclusively for use by NEC Philips channel partners
All rights are reserved. Reproduction whole or in part is prohibited without the written consent of the copyright owner. 6 of 19
• 802.3x Flow Control
Blade Management :-
• Multi-unit stacking (multiple blades (3 in a stack) in a system are managed from the
• same user interface)
• Switch management through Web-based GUI
• Software upgrades via Web-based interface
• Configuration Upload/Download
3.2.1 Benefits
Provides an in skin Ethernet Switched hub providing all the LAN functionality and power required for
an IP telephony (DT7XX) installation.
3.2.2 Required Software and Hardware
CD-ETIA
SV8100 R2 Software
3.2.3 Training Course Required
SV8100 ETIA
3.3 RTB (InRouter)
The RTB (InRouter) is a router card providing :-
CD-RTB Router
• 4-port switching hub with 10Base-T/100Base-TX (10Mbps / 100Mbps)
• In-skin solution for converged high voice quality networking services
• Stateful packet inspection firewall and VPN based security
• Easy remote monitoring and troubleshooting, e.g. detailed MOS statistics
• T1 or 10 / 100 Mbps Ethernet WAN connectivity
• Power over Ethernet
• Max nr of CD-RTB blades:
To Next Page
Loading...
