UNIVERGE SV8100 Issue 5.02
General Description Manual 1 - 11
3.3 Equipment and Applications Overview
The primary target of the UNIVERGE SV8100 system is the small to
medium-sized business. As such, it supports a number of robust applications
and additional equipment that add value to the system. These include:
Automatic Call Distribution (ACD)
Voice Mail
Computer Telephone Integration (CTI)
Unified Messaging
Wireless Handsets
Station Message Detail Recording (SMDR)
Single Line Telephones
External Speakerphones
Doorphones
External Speakers
Wireless DECT SIP
CO/PBX lines, Centrex lines, Direct Inward Dialing (DID), Tie lines, FT1
lines, ISDN-BRI and ISDN-PRI line
Communications between legacy stations/trunks and DT700 series
telephones/IP networks are made using a VoIP daughter board, which
converts packet-based voice data to TDM-based voice data, and vice versa.
Both peer-to-peer connections and TDM-based connections are controlled by
the CPU blade. The CPU incorporates a built-in Device Registration Server
(DRS) and a single interface point of IP connection to IP telephone, PCPro
and OAI / ACD servers. Figure 1-5 Simplified SV8100 System (9.5” Gateway
and Base) Connectivity, Figure 1-6 Simplified SV8100 System (19”)
Connectivity on page 1-12 and Figure 1-7 Simplified SV8100 System (9.5”
Base and Expansion) Connectivity on page 1-13 are simplified views of the
SV8100 system connectivity.
To Next Page
Loading...
