8. CHS2U-GW-xx / CHS2U B-xx / CHS2U E (9.5 inch KSU)
The CHS2U-GW-xx / CHS2U-B-xx, 9.5 inch Chassis has three (Slot 1 for CPU) universal board
slots for legacy line / trunk board (Single Line Telephone Interface, Digital Multi-line Terminal
Interface, Central Office Trunk, ISDN PRI Interface, etc.), In-skin Application boards (In-skin UMS,
In-Skin Router, etc.). It also houses Power Supply Unit (PSU).
CHS2U-GW-xx / CHS2U-B-xx can be mounted on the wall or a stand mount.
前面と背面の絵
Fig 8-A CHS2U-GW-xx / CHS2U B-xx (Front / Rear View)
In the CHS2U GW-xx and CHS2U B-xx the CD-CP00-xx must be installed in the first slot (slot 1).
When the CD-CP00-xx blade is installed in slot 1 of the 9.5” Base Chassis, it is called the
controlling chassis. Additional chassis, (9.5” Expansion Chassis) can be installed to increase the
capacity of the system to meet the customer’s business needs.
After combine CHS2U B-xx and CHS2U E, it can be mounted on the wall or Rack mounted.
CHS2U E
Expansion Chassis
Base Chassis
CHS2U B-xx
CD-CP00-xx
Fig 8-B 9.5” Base and Expansion Chassis CPU Location
28
To Next Page
Loading...
