NEC Univerge SV9100 - Page 160

146
1.
Menu List for Setting - Classic Mode
Menu Item Description Default Value
Setting
1 User Setting Select this option to configure the user setting of DT930. –
1 Incoming Call Select this option to set up for incoming calls. –
1 Offhook Ring Select this option to specify whether to use the Off-hook ringing. Enable
2 Headset Ring Select this option to specify whether to use the headset ringing. Disable
3 Ring Tone
Select a ringer tone for External Call and Internal Call.
(Automatic / Tone Type 1~14 / Download 1~3)
Automatic
(Tone Type 1)
4 Illumination
Select this option to set the illumination pattern for External Call and
Internal Call.
(Automatic / Disable / Red / Green / Blue / Yellow / Purple Light Blue /
White / Rotation)
Automatic
(Red)
2 Talk Select this option to set up for telephone conversation. –
1 RTP Alarm Select this option to specify whether to use the RTP alarm. Automatic
2 DTMF Tone Select this option to specify whether to use the DTMF tone. Automatic
3 Key Touch Tone
Select this option to set the key touch tone generated when the digit
keys are pressed while the telephone is off-hook.
Automatic
(Tone)
4 Hold Music Select a Music on Hold to be heard by DT930 user. Default
5 Prefix Select this option to register a Prefix number. –
3 Display Select this option to set up for the LCD display. –
1 Calendar Format Set calendar display format and time display format.
Automatic (12-
hour format)
2 Local Volume
Specify whether to display the following volume levels: handset
receiver volume, speaker volume, ringer tone volume and LCD
contrast.
Automatic
(Enable)
3 Screen Saver Select this option to set up Screen Saver related data. –
1 Screen Saver
Mode
Select this option to specify whether to use a Screen Saver. Enable
2 Wait Time Select this option to specify the Wait Time to launch a Screen Saver. 30 min