NEC Univerge SV9100 - Set Key Touch Tone

40
1.
Set Key Touch Tone
The procedure below shows how to set the Key Touch
Tone. Key Touch Tone is a tone generated when the
digit keys are pressed while DT930 is off-hook.
(1) Display the Menu screen, select Setting.
(2) Select User Setting.
Select an item by one of the following operations.
❍ Highlight an item by using , and press ,
or OK.
❍ Press .
(3) Select Talk.
Select an item by one of the following operations.
❍ Highlight an item by using , and press ,
or OK.
❍ Press .
(4) Select Key Touch Tone.
Select an item by one of the following operations.
❍ Highlight an item by using , and press ,
or OK.
❍ Press .
1
1
2
2
3
3