NEC Univerge SV9100 - Page 50

36
1.
(4) Select Illumination.
Select an item by one of the following operations.
❍ Highlight an item by using , and press ,
or OK.
❍ Press .
(5) Select External Call when setting the
illumination pattern for external calls. Select
Internal Call when setting the illumination
pattern for internal call.
Select an item by one of the following operations.
❍ Highlight an item by using , and press ,
or OK.
❍ Press or .
(6) Select a desired illumination pattern. You can
preview the designated illumination pattern.
Select an item by one of the following operations.
❍ Highlight an item by using , and press or
OK.
❍ Press - , and press or OK.
Note: When selecting Automatic, the preview function will
not operate.
4
4
1
2
1
2
0
9