NEC Univerge SV9100 - Page 89

75
1.
(13) The display returns to the Account Settings
screen. Press or Back to display the
Backup/Restore screen.
(14) Select Server Address.
Select an item by one of the following operations.
❍ Highlight an item by using , and press ,
or OK.
❍ Press .
(15) Enter an IP Address of the destination FTP/
TFTP/HTTPS server.
For example, to set the IP address of
10.41.208.205, enter 10*41*208*205 [separate
with an asterisk (*)].
After entering an IP Address, press (Enter) or
OK.
3
3