NEC Univerge SV9100 - Chapter 12 All DSP Busy Indication; Section 1 Introduction; Section 2 Service Conditions; Section 3 Related Features

Programming One-Touch Keys
To program: SPEAKER + 855 + Key + Number + HOLD + Name (see Entering Names)
DSS:
Enter Co-worker’s extension # + SPEAKER to hang up.
Personal Speed Dial:
Enter 9 + Outside # or
Enter 804 + Line group # (1-9 or 1-100) + Outside # or
Enter 805 + Line # (001 to 200) + Outside # + SPEAKER to hang up.
Service Codes:
Enter Service Code + SPEAKER to hang up. For example, you can make a Save # Clear key by
entering 885.
To Dial: SPEAKER + press and hold keypad number relating to key (for key 01 long press keypad key 1)
Programming Function Keys – General
To program: SPEAKER + 851 + Key + Code + Optional Data.
Call Forwarding:
Enter 10 for Call Forwarding Immediate.
Enter 11 for Call Forwarding Busy.
Enter 12 for Call Forwarding No Answer.
Enter 13 for Call Forwarding Busy/No Answer.
Enter 14 for Call Forwarding Both Ring.
Enter 15 for Call Forwarding Follow Me.
Enter 16 for Call Forwarding to extension.
Enter 17 for Selectable Display Messaging, Personal Greeting (same as dialling 713).
Conference:
Enter 07 if you want a Conference key.
Hold:
For Exclusive Hold enter 45.
DSS/One Touch:
Enter 01 + Co-worker’s extension + HOLD.
Memo Dial:
Enter 31.
Save Number Dialled:
Enter 30.
Repeat Redial:
Enter 29.
Voice Mail Box:
Enter 77 + Your extension number.
Page:
Internal: 21 + Zone (1-64) or 22 (All Call)
External: 19 + Zone (0-8)
Combined: 20 for (Internal and External All Call)
Programming Function Keys – Appearance
To program: SPEAKER +852 + Key + Code + Optional Data.
Line keys:
Enter *01 + Line number (001-200)
Call Coverage Keys:
Enter *03 + Co-worker’s extension number.
Park:
Enter *04 + Orbit number (01-64)