NEC Univerge SV9100 - Chapter 11 NAPT; Section 1 NAPT; Section 2 Conditions; Section 3 Restrictions - Static NAT

Quick Reference for Other Features
Do Not Disturb:
SPEAKER + 847 + 1 to block your outside calls OR 2 to block Paging, Intercom calls, Call
Forwards and transferred outside calls OR 3 to block all calls OR 4 to block Call Forwards OR 0 to
cancel.
Name Storing:
SPEAKER + 800 + Extension + Name (See Abbr. Dialling) + HOLD.
Call Forward:
SPEAKER + 848 + 1 + Extension for Immediate
SPEAKER + 842 + 1 + Extension for Dual Ring
SPEAKER + 843 + 1 + Extension for Busy
SPEAKER + 844 + 1 + Extension for Busy and No Answer
SPEAKER + 845 + 1 + Extension for No Answer
SPEAKER + 846 + 1 + Extension for Follow Me
You can replace Extension with the Voice Mail master number to forward calls to your mail box.
Cancel a Call Forward:
SPEAKER + call forward code + 0
Call Redirect:
When your phone is ringing, do not lift the handset or press the SPEAKER key,
press (Redirect)
Ringing Tone:
SPEAKER + 820 + 1 for Intercom calls to your phone
SPEAKER + 820 + 2 for Outside calls to your phone
Select the tone 1-8 (the tone will be heard)
SPEAKER to set the ringing tone
Time:
SPEAKER + 828 + 2 digits for hour (24 hour format) + 2 digits for minutes + SPEAKER to hang up.
Common Cancel
Code:
SPEAKER + 720 to cancel all of the following features:
Call Forward, Message Waiting, DND, Alarm Clock, Repeat dial, Text Message.
Directory Dialling
At your display
telephone, select a
co-worker or outside
call from a list of
names (rather than
dialling the phone
number):
1. Press DIR Soft Key.
2. Press Soft Key for Directory Dialling type:
ABB = Common Abbreviated Dialling.
EXT. = Co-worker’s extension numbers.
STA. = Personal abdials (1-10).
TelBK = Telephone book data.
3. Dial letter/number range for the party you want to call (e.g., dial 2 for A, B, C or 2).
4. Press the Down Arrow Soft Key to jump to that section.
5. Press Up or Down Arrow Soft Key to scroll through the list.
6.
or lift handset to place call or press the Dial Soft Key.