NEC Univerge SV9100 - Chapter 2 Hardware Installation <US Only>; Section 1 Installation Precautions; Section 2 Installing an Extension or Trunk Blade; Chapter 2 IP Networking

Using Your Telephone Example layout displayed
Due to the flexibility built into the
system, your Dialling Codes and
Feature Capacities may differ from
those in this guide. Check with your
System Administrator and make a note
of any differences.
If you’re on a Handsfree Call (see
Handsfree Options below), lift the
handset for privacy.
Recall
press the key to finish
the call and return to dial tone.
Redial
press the key to dial the
last called number
Answer
When LED is lit press to
answer a waiting call.
Directory
press the key to access
the system TelBook and Abbreviated
Dials.
Press the HOLD
key to pace an
internal or external caller on hold.
Transfer
allows the station user to
transfer calls without attendant
assistance.
Speaker
controls the built in
speaker which can be used for Hands
Free dialling /monitoring.
LED is on when active.
See Handsfree Options below. While
on a handset call, press SPK once for
Handsfree; twice for Group Listen.
The Soft Keys provide quick and
easy access to features - just follow
the menu on the display (not
available on all models).follow the
menu on the display (not available on
all models).
The Alphanumeric Display helps
you use features and tells you
about your calls. With optional
Caller ID, a ringing line may show
your caller’s number and name.
The Message Wait LED flashes when you
have Messages Waiting. If you don’t have
a Voice Mail key, it also flashes when you
have Voice Mail messages left in your
mailbox.
These are
and/or keys. See
Programming Function Keys for more on
setting up these keys.
Feature
Used to activate any features
as terminal setup functions, etc, and to
program One-Touch Speed Dial Keys.
Conf
Press key whilst on a call to
initiate a conference call.
MIC
Press key to respond hands free.
LED is lit during speakerphone operation.
Message
Press key to check
Messages Waiting and Voice Mail
messages
The Up/Down keys adjust LCD contrast
and volume up by selecting the up key and
down with the down key.
Handsfree Options
• Handsfree lets you place and answer calls by pressing instead of using the handset.
• With Automatic Handsfree, you can press a Line Appearance key without lifting the handset.
Normally, you have Automatic Handsfree.
• Use Handsfree Answerback to answer a voice-announced Intercom call by speaking toward your
phone — without lifting the handset.