14
Change Your Ring Tones
To change your extension’s incoming ring tones:
1. CALL1 + 820.
2. Dial 1 to set the Intercom ring or Dial 2 to set the outside line ring.
– Transferred calls use the intercom ring tone you select.
3. Dial the code for the ring pattern you want (Tones 1-8).
– You’ll hear the new ring tone as you dial each digit.
4. SPK to hang up.
To listen to the incoming ring choices:
1. CALL1 + 811.
2. Dial 1 to listen to the Intercom ring or Dial 2 to listen to the outside line ring.
3. Dial code for ring pattern you want (tones 1-8).
– For outside line ring (1-3), enter the tone (1-4) to which you want to listen.
4. SPK to hang up.
Dialing By Name (Directory Dialing)
To dial a co-worker or outside call by selecting from a group of names:
1. Push Dir Soft Key.
2. Push Soft Key for Directory Dialing type:
– ABBc = Common or Group Abbreviated Dialing
– EXT. = Co-worker’s extension numbers
– STA = Personal Abbreviated Dialing
– TELBK = Central Telephone Book
3. Dial letter/number for the party you want to call (e.g. dial 2 for A, B, C or 2).
4. Push the Down Arrow Soft Key to jump to that section.
5. Push the Down Arrow Soft Key or press VOL L or M to scroll through the list.
6. CALL1 or lift handset to place call or push the Dial Soft Key.
To Next Page
Loading...
Need help?
General