EasyManua.ls Logo

Necta KORO PRIME ES - Complete Machine Cleaning; Instant Canister Cleaning; Brew Unit Cleaning; Internal Machine Cleaning

Necta KORO PRIME ES
4 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
KORO PRIME ES
N&W GLOBAL VENDING S.p.A. - Via Roma, 24 - 24030 Valbrembo (BG) Italy - Tel. +39 035606111 - Web: www.nwglobalvending.com
Instant canister:
Open the vending machine door and lift the upper panel.
Push slightly inside and lift the canister.
Remove the canister from the machine
Dust the canister and the base carefully.
Re-position the canister into its seat.
A
B
C
D
Cleaning the brew unit:
Unscrew the ring nut (A) and pay attention not to lose the gasket.
Remove the coffee waste conveyor (B), if any.
Unscrew the pin (C).
Remove the brew unit (D).
Cleaning the brew unit
Whenever you load or at least every week, it is recommended to
remove any coffee residual from around the brew unit.
Rinse the brew unit beneath a water jet.
Rinse the unit carefully.
Re-assemble the unit by carrying out the operations in the reverse
order.
Clean inside the machine with a neutral detergent solution by using a
piece of cloth that is slightly wet.
Never use any water jet.
To avoid any risk of chemical oxidation or corrosion
in general, use neutral detergents and avoid any sol-
vent.
2
4
1
3
cOMplEtE clEaNiNG

Related product manuals