KORO ESPRESSO
10
© by N&W GLOBAL VENDING S.P.A. 0503 257 - 00
Refilling with products
To correctly refill with products do as follows:
Open the door of the machine.
The machine will switch off automatically to allow the
operation in full safety.
Lift the top panel of the machine.
Instant product: remove the lid of the container and
check the level of the product blend.
Refill the container ensuring not to press the powder.
Check that there are no product clots in the mixer.
Coffee: fill with coffee, without pressing and without
exceeding the level of the container.
Clean coffee powder residue from the exposed parts
using a brush.
OPERATIONS TO BE CARRIED OUT
WITH THE DOOR OPEN
Close the powder containers, top panel and door of the
machine and perform the switching on cycle described
previously.
To Next Page
Loading...
Need help?
General
