Necta Krea Espresso - Complete Cleaning Procedures; Disassemble Mixer Components; Disassemble Mixer Impeller; Disassemble Nozzles and Mixer Tray

KREA ESPRESSO
2
1 2
3 4
1
Disassemble the mixer
• Lifttheinstantpowderdispensingmouth(D)
• Detachthetube(A)fromthemixer
• Turnthelever(B)counterclockwise
• Takethemixerunit(C)andpull
Disassemble the mixer
Detachallcomponents:funnel(A),mixerring(B),waterconveyor(C)
Disassemble the mixer impeller
Exercisealighttractiontodisassemblethemixerimpeller
Disassemble the nozzles and the mixer tray
• Detachthetubesfromthenozzles
• Detachthenozzlesfromthesupport
• Unscrewtheknurl(A)fromthemixertray(B)
• Removethemixertray
Sanitisation of components
• Washallcomponentswithasanitisingsolutionandmakesurethat
allvisibleresiduesandfilmsaremechanicallyremovedbymeans
ofpipecleanersand/orbrushes.
• Rinseanddrythepartscarefully
Assemble the mixer impeller
• Re-positionandpushthemixerimpeller
• Makesurethatyouhaveinsertedittothebottom,untilyouheara
click.
a
a
b
b
c
c
d
To avoid altering the taste of drinks, never use detergents
that are too much flavoured and/or solvents
complete cleaning
3
4
5
6
a
b
1
3
2
1
3
2