Nectar Hex - Cleaning Guide: Light Clean; Prepare for Light Cleaning; Cleaning the Mouthpiece; Cleaning the Heating Chamber

14 15 16 17 18
Prepare for cleaning
Before cleaning your device, it is important to
allow your device to completely cool down in
order to avoid injuries. Once cooled, detach
your cooling unit and prepare your device for
cleaning by brushing away any loose leaf.
01
03
Cleaning the mouthpiece
02
Once detached, scrub the inside of the mouthpiece
with a pipe cleaner soaked in Isopropyl Alcohol
(ISO). Clean the outside of the mouthpiece with an
alcohol pad before wiping away excess dirt with a
clean and dry pipe cleaner and/or cloth.
Cleaning the heating chamber
Soak a cotton swab or cleaning brush with ISO.
Insert into the chamber and scrub the sides and
bottom with a circular motion and repeating the
process until you are satisfied. Then dry using a
clean and dry cloth or cotton swab.
Cleaning: Light Clean
Perform a light clean once every 5 sessions (Steps 1 to 3).
03