4 5 6 7 8
Before sterilising your device, ensure it has been sufficiently
charged (see page 4). If you’re sterilising after cleaning the device
then ensure your parts have been wiped dry with a clean cloth
before proceeding to the next step.
Prepare for sterilising
Sterilising in 3 steps
01
Turn the device on by pressing the power button 5 times. Then set
your vaporizer to the maximum temperature (240°C) by holding the
temperature ‘up’ button until 240°C is reached.
Setting your temperature
02
Detach the cooling unit and allow the device to heat for 3 minutes
with an empty chamber in order to sterilise it. The device has a
built in 3-minute timer and hence it will turn itself off once the
sterilisation process is complete.
Repeat this step once more with the cooling unit attached. In
summary, you will do this once without the cooling unit detached
and once with the cooling unit attached.
Sterilising
03
To Next Page
Loading...
