Nectar Platinum - Cleaning: Deep Clean; Cooling Unit Dismantling; Filter Cleaning Method 1; Filter Cleaning Method 2

Dismantle the Cooling Unit
1. Pull the rubber holder out of the cooling unit.
2. Begin to invert the rubber holder.
3. Push out the rubber holder filter and ceramic holder
4. Pull out the horseshoe slip.
5. Detach the ceramic mouthpiece
04
Method 1: Cleaning the filters
05
There are different ways to clean your filters
depending on the level of residue. We recommend
starting with Method 1: Use alcohol pads to rub
away any residue and clean each part individually.
Put your device back together, sterilise and use.
Method 2: Cleaning the filters
06
Method 2: Soak all ceramic and metal parts from the
cooling unit into a container filled with ISO. Scrub each
part clean using a brush soaked in ISO. Rinse off each
part with lukewarm water and then dry using a clean
cloth. Put your device back together, sterilise and use.
Note: Isopropyl alcohol deforms rubber. Do NOT soak rubber parts for more than 30s.
Cleaning: Deep Clean
Perform a deep clean once every 20 sessions (Steps 1 to 6).
11 12