Before sterilising your device, ensure it has been
sufficiently charged (see page 4). If sterilising after a clean,
ensure your parts have been wiped dry with a clean cloth before
proceeding to the next step.
Prepare for Sterilising
Sterilising in 3 steps
01
Set your vaporizer to the maximum temperature (240°C) by holding
the temperature ‘up’ button until your desired temperature is
reached. See Page 5 for more information.
Setting your temperature
02
Allow the device to heat for 5 minutes with an empty chamber in
order to sterilise it. The device has a built in 5-minute timer and
hence it will turn itself off once the sterilisation process in com-
plete.
Repeat this step twice. Once without the cooling unit detached and
once with the cooling unit attached.
Sterilising
03
12 13
To Next Page
Loading...
